Pneumatic Dent Puller – Air Suction Slide Hammer, 3 Cup Sizes, No Glue
Free Shipping & Simple Returns
10% Off Orders of 2+ Items
Details
Air suction · Steel slide hammer · 3 cup sizes
Pull Car Dents Out in Your Own Driveway
A door ding, a shopping-cart hit or a shallow hail mark does not have to mean messy glue tabs or a trip to the body shop. This pneumatic dent puller uses air from your compressor to lock a rubber cup onto the panel, then a solid slide hammer gives you a steady, controlled pull.


The problem
That dent you see every time you walk to the car
Small dents are annoying, and the usual fixes are not great: glue pullers leave residue and often let go, hand suction cups have little power, and a body shop visit for one ding adds up quickly.
This tool takes a different route. Air pressure holds the cup on the panel while you work the slide hammer, so you can pull the dent out step by step without glue, drilling or heat.

Compressed-air suction
Your compressor does the gripping
Air from your compressor locks the cup onto the panel, so every pull is steady and controlled instead of guessing with hand force.
A brass air inlet valve with a blue lever lets you control the air, and the release valve lets the cup come off cleanly when you are done.





Built to last
A galvanized steel slide hammer
A 1.36 kg (3 lb) slide hammer runs on a galvanized steel body of about 61.5 cm (24.2 in), giving real pulling force on car and light truck panels. It is made for repeated garage and body-shop use and will not bend after repeated pulls.
- Knurled grip: the textured handle stays put in your hand, even after a dozen pulls in a row.
- Quick connect: fits a standard 6.35 mm (1/4 in) quick-connect air fitting.
- Long reach: the long body helps on wide or deeper panel areas.

3 cup sizes
The right cup for every dent
Swap between small, medium and large natural rubber cups to match the dent. Use the small cup for tight spots and the large one for wide, shallow dents.
What you can use it for
From door dings to palm-size dents

Paint-friendly
No glue, no drilling, no heat
The cup grips with air pressure only, so there is nothing to scrape off afterwards. Clean the panel, seal the cup, pull, then open the release valve before lifting the cup off.
It works best on clean, smooth, non-porous panels. Results depend on the shape, depth and position of the dent and the condition of the paint.
How it works
Three simple steps
1. Connect the tool
Attach it to your air compressor and pick the cup that fits the dent.
2. Place and pull
Clean the panel, seal the cup over the dent and pull with the slide hammer using steady, controlled pulls.
3. Check and repeat
Check the panel and repeat until you are happy with it. Go slowly and work from the shallow edge of the dent inwards.



Built for cars and light trucks
Doors, fenders, hoods and more
Use it on steel and aluminium body panels: doors, fenders, hoods, quarter panels, tailgates and roofs. One tool that lives in your garage for the next ding.
It is not made for plastic bumpers, trim or glass, because plastic flexes instead of holding a vacuum pull.
Why this one
Air-powered puller vs basic dent pullers
| This dent puller | Basic pullers | |
|---|---|---|
| Pulling system | Compressed air | Hand force |
| Slide hammer | Galvanized steel | Less stable |
| Cup options | 3 sizes | Often one size |
| Cup material | Natural rubber | Basic cups |
| Surface care | Gentle, even pull | Uneven force |
| Handle control | Knurled grip | Smooth handle |
| No glue residue | ✓ | ✗ |
| Cars and light trucks | ✓ | Less versatile |

In the kit
Everything you need to start
The kit comes with the slide-hammer puller, three interchangeable rubber cups and an air hose. All you add is your own air compressor.
Questions people ask
Will it work on my dent?
It is made for a wide range of dents, including door dings, shopping-cart hits, parking bumps, broad panel dents and shallow hail damage. It works best on shallow dents on clean, smooth panels.
Do I need an air compressor?
Yes. It runs on the compressor in your garage and connects with a standard 6.35 mm (1/4 in) quick-connect fitting. Even a small pancake compressor has enough air for it, as long as it keeps a steady airflow.
Will it damage my paint?
The cup grips with air pressure only, with no glue, drilling or heat. Clean the panel first so the rubber seals well, and release the valve before lifting the cup off.
Which panels does it work on?
Steel and aluminium body panels: doors, fenders, hoods, quarter panels, tailgates and roofs. Not plastic bumpers, trim or glass.
Do I need experience?
If you can hook up an air hose, you can use it. Connect, seal the cup over the dent, open the valve and work the slide hammer with steady pulls. Many first-timers see the dent moving within a minute.
Specifications
- Overall length: about 61.5 cm (24.2 in)
- Slide-hammer weight: 1.36 kg (3 lb)
- Suction cups: 3 interchangeable sizes, natural rubber
- Material: galvanized steel body, rubber suction cups, pneumatic hose and fittings
- Power source: air compressor (not included), 6.35 mm (1/4 in) quick-connect fitting
- Product weight: about 2.6 kg (5.73 lb)
- Package size: about 40 x 40 x 30 cm (15.75 x 15.75 x 11.81 in)
- Use: dent repair on car and light truck body panels
What's in the box
- 1 × pneumatic slide-hammer dent puller
- 3 × interchangeable suction cups
- 1 × air hose